8 Gallon Brew Kettle with Thermometer & Ball Valve Ports

Install compatible brewing accessories such as a thermometer probe or ball valve using the threaded ports.

Apply Teflon tape to threaded fittings before installation if desired.

Fill the kettle according to your brewing recipe and monitor liquid levels using the graduated volume markers.

Use the upper port with a compatible thermometer probe to monitor boil and chilling temperatures.

Use the lower port with a compatible ball valve to transfer wort into a fermenter without lifting the kettle.

Clean thoroughly after use.

• 8 Gallon Brew Kettle with Ports
• Lid
• Roll of 0.5” x 394” Teflon tape

This 8 gallon brew kettle is designed for full volume brewing and customizable brewing setups.

Useful for:

• Full volume beer brewing
• Wort boiling
• Monitoring boil temperatures
• Wort chilling workflows
• Valve-assisted wort transfers
• Custom brewing system upgrades

The threaded ports allow brewers to configure the kettle with compatible brewing hardware based on their preferred workflow.

This brew kettle can also help:

• Reduce lifting during wort transfers
• Improve temperature monitoring on brew day
• Support custom brewing equipment configurations
• Simplify measuring water and wort volumes

Unused ports can be plugged with compatible 1/2” NPT hex plugs.

• Material: 201 stainless steel
• Capacity: 8 gallons
• Dimensions: 12” wide x 17.5” deep
• Wall & Bottom Thickness: 1 mm
• Ports: Two welded and threaded 1/2” NPT ports
• Port Placement:
  -1.5” off bottom
  -6” off bottom
• Volume Markers: Inside and outside kettle
• Lid Included: Yes
• Includes: 0.5” x 394” Teflon tape
• Induction Compatible: No